As I mentioned in the previous post (Part 3: Bicycle wheel attachment), the other feature about Mein Bierwagen that I think is cool, is the loading of my Keezer Dolly directly onto the cart. This post shows you how to do it. Using the ramp method, I can do it myself, but you’ll need two people at least if you just build it as a platform for your own Keezer.

Difficulty:

This project just requires some basic building skills, but you might need some help getting the keezer onto the Bierwagen.

Posts for this Project:

Part 1: Introduction
Part 2: Building of the frame
Part 3: Bicycle wheel attachment
Part 4: Getting the keezer onto the Bierwagen (this post)
Part 5: Keezer collar
Part 6: Storage of the Bierwagen

Affiliate Links

Any links in this post or on this website may link to affiliates, which compensate this website for purchases. All links are provided to help the reader locate items mentioned or used in the post. As an Amazon Associate I earn from qualifying purchases.

Procedure:

First you need to remove the support legs at the front of the Bierwagen.

Then with it right side up, you’ll brace it against a wall.

Next, you need to line up your keezer dolly at the tip of the cart. Notice, I haven’t installed the keezer collar yet. I wanted to make sure it wasn’t too tippy.

You can see that the keezer dolly just clears the leading edge of the cart. If yours isn’t tall enough, you can either cut the bottom side of the handles (front of cart) or lift up a bit to get it up on the rails.